doomer-see-1 in graphite with smoke lenses, a camera module and a LiDAR module clipped to the temples

doomer-see-1

A heads-up display for people who ship software.

See-1 puts one colour of text in the corner of your right eye: the agent waiting on a yes, the build that just broke, the page you would rather not miss. That is all it does.

Preorder for $499

Ships 2027. Refundable until it does.

Choose a frame

One colour, 640 by 400, nothing you didn't ask for.

A single-colour micro-LED is brighter per milliwatt and lighter than a full-colour engine, and it has no interest in showing you video. The screen below is the see-1 display at its real resolution.

claude-code ~/doomer-sdk main14:07 ▮▮▮▯
Batch draw calls in the renderer
✓ Read src/render.ts
✓ Edit src/render.ts +41 −17
✓ Edit src/batch.ts +88 −0
✓ Run npm test 212 passed
✓ Run git commit -m "batch draw calls"
Waiting on you
git push origin main
Allow Deny
tap allow hold deny swipe next session

Simulated. 640 × 400, one page pixel per display pixel on a desktop screen.

pixels, monocular
640 × 400
diagonal field of view
28°
to the eye
400 nits
refresh
60 Hz

No camera until you clip one on.

The frame ships without a camera. Sensors are modules that clip to a rail on either temple, so the people around you can see what you are carrying, and you only wear the grams you need.

Graphite doomer-see-1 with a camera module on the left temple and a LiDAR module on the right
Camera moduleLiDAR module
Modules available at launch
ModuleWhat it addsWeight
Camera12 MP stills, 1080p videoThe capture LED is wired to sensor power, so it cannot be switched off in software.4.1 g
LiDARTime-of-flight depth, 0.2 to 5 mRoom scans, distance readouts and depth for third-party apps.3.8 g
Thermal160 × 120 long-wave infraredFind the hot component, the cold draught or the overloaded breaker.4.6 g
EnvironmentalCO₂, VOC, temperature, humidity, pressureAir quality logged where you actually breathe it.2.9 g
Battery110 mAh expansion cellAbout one more day. Hot-swappable while the glasses stay on.5.2 g

The rail is documented, so build your own.

Eight magnetic pogo pins on each temple, with a published mechanical drawing and electrical spec. If it speaks USB or I²C and draws under 300 mA, it can be a module.

  1. VBUS1
  2. GND2
  3. D+3
  4. D−4
  5. SDA5
  6. SCL6
  7. INT7
  8. ID8
Bus
USB 2.0 full speed, I²C at 400 kHz
Power
3.3 V, up to 300 mA per side
Hot-plug
Enumerates in under a second
Retention
Magnet and mechanical clip

DoomerOS is a text runtime, and it is yours to script.

Apps are small TypeScript programs. They run on your phone or your laptop and draw to the glasses. More than a hundred exist already, including the Claude Code client above.

Open source
doomer-sdk, the simulator and the module rail spec are all public.
Simulator first
Develop against a 640 × 400 window. No hardware needed to start.
Bring your own tools
Claude Code, your CI, your pager and anything else with a webhook or a CLI.
Runs on Even G2
Pair a G2 and the same apps render there, scaled to its display.
deploys/app.ts
import { defineApp, row } from "doomer-sdk";

export default defineApp({
  name: "deploys",
  subscribe: ["webhook:ci.deployment"],

  render({ events }) {
    return events
      .slice(-4)
      .map((d) => row(d.service, d.target, d.state, d.commit));
  },

  onTap({ selected, open }) {
    open(`logs:${selected.id}`);
  },
});

npx doomer devsimulator at 640 × 400

npx doomer pushinstall on paired glasses

It leaves the desk when you do.

The SDK is not limited to developer tools. These are concept renders of two third-party apps built for the slopes.

Skier's view through birch trees with a red overlay showing speed, vertical drop, a hazard marker and a friend's position
Descent, on the chrome frame's red display
View from a chairlift with an amber overlay listing open runs, snow conditions and the route down
Slopes, on the silver frame's amber display

Concept renders. The overlay is drawn larger than the see-1 field of view.

Three frames, each with its own display colour.

Pick one and the whole page switches to that display.

Frame

Tech specs

Display

Type
Monochrome micro-LED with diffractive waveguide
Eye
Right, monocular
Resolution
640 × 400
Field of view
28° diagonal
Brightness
400 nits to the eye, auto-dimming
Refresh
60 Hz
Colour
Green, red or amber, set by frame
Lens transmission
85% at the display area

Connectivity

Wireless
Bluetooth LE 5.4 and Wi-Fi 6
Hosts
iOS, Android, macOS, Linux
Even G2
Renders DoomerOS apps on a paired G2
Wired
USB-C on the charging case

Audio and input

Microphones
4-mic beamforming array
Touch
Capacitive strip on the right temple
Gestures
Tap, hold, swipe
Voice
Dictation and commands through the host

Sensors

Motion
9-axis IMU
Light
Ambient light sensor
Wear
Capacitive wear detection
Camera
None in the frame

Module rail

Modules
Camera, LiDAR, thermal, environmental, battery
Connector
8-pin magnetic pogo, both temples
Bus
USB 2.0 and I²C
Power
3.3 V, 300 mA per side

Battery

Life
2 days of typical use
Capacity
220 mAh in the frame
Case
5 full recharges
Charging
0 to 80% in 30 minutes

Software

System
DoomerOS
Apps
100+, including Claude Code
SDK
doomer-sdk, TypeScript, open source
Updates
Over the air

Physical

Weight
Under 50 g without modules
Frames
Graphite, chrome, silver
Water
IP54
Prescription
Clip-in inserts, −8.00 to +4.00

Preorder doomer-see-1

$499

First batch ships in 2027. Your preorder is fully refundable until yours leaves the warehouse.

Choose a frame
Preorder for $499
doomer-see-1 in graphite with smoke lenses, a camera module and a LiDAR module clipped to the temples

In the box

  • doomer-see-1 in the frame you pick
  • Charging case and USB-C cable
  • One module of your choice
  • Early access to doomer-sdk and the simulator

Specifications are targets for the first production batch and may change before shipping.

Questions

Do I need a phone?

No. Apps run on a host, and the host can be your phone or your laptop. On the same Wi-Fi network as your laptop, the glasses connect directly. Away from it, they go through your phone over Bluetooth LE.

What does monocular mean in practice?

The display is in the right lens only. Your left eye sees the world unaltered, and the text sits about two metres out in the upper part of your right eye's view. Most people stop noticing the difference within a day.

Is there really no camera?

Not in the frame. If you want one, clip on the camera module. Its capture light is powered by the same line as the sensor, so it is on whenever the sensor is.

Can I wear it with a prescription?

Yes. Clip-in inserts cover −8.00 to +4.00. You send your prescription after you preorder and the inserts ship with the glasses.

How does Claude Code run on glasses?

It doesn't. Claude Code keeps running on your machine. The DoomerOS client shows each session's progress and forwards permission prompts, so you can approve or deny from wherever you are.

I already own an Even G2. Can I use DoomerOS?

Yes. Pair the G2 as a display and DoomerOS apps render on it. Module features need see-1 hardware.

What if you slip the ship date?

You can cancel for a full refund at any point before your unit ships, for any reason.